Stainless steel cyclone dust collector

The stainless steel cyclone dust removal equipment is composed of intake pipe, exhaust pipe, cylinder, cone and ash hopper. The stainless steel cyclone dust removal equipment is simple in structure, easy to manufacture, install, maintain and manage, low in equipment investment and operation cost, and widely used to separate solid and liquid particles from the gas flow or solid particles from the liquid. Under normal operating conditions, the centrifugal force acting on particles is 5-2500 times of gravity, so the efficiency of cyclone dust collector is significantly higher than that of gravity settling chamber.

It is applicable to the removal of non-viscous and non-fibrous dust, mostly used to remove particles above 5 μ m. The parallel multitube cyclone dust collector has a dust removal efficiency of 80~85% for particles above 3 μ m. Cyclone dust collector made of corrosion resistant special metal or ceramic materials can be used at temperature up to 1000 ℃. The stainless steel cyclone dust collector belongs to the medium-efficiency dust collector, and can be used for the purification of high temperature flue gas. It is a widely used dust collector, mostly used for boiler flue gas dust removal, multi-stage dust removal and pre-dust removal. Its main drawback is low removal efficiency for fine dust particles (<5 μ m).

The flow path after the airflow enters the cyclone dust collector and the form with secondary air can be divided into the following two types according to the airflow introduction condition: the tangential reversing cyclone dust collector and the axial flow cyclone dust collector.